Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.8717459
- Product Categories
- Friendly Links
- home > Supply > Identified by experts in basalt, the most suitable for the raw materials of cast stone
Information Name: | Identified by experts in basalt, the most suitable for the raw materials of cast stone |
Published: | 2012-07-03 |
Validity: | 365 |
Specifications: | Length / 1-6m thick / 5-100 (mm) |
Quantity: | 1500201.00 |
Price Description: | |
Detailed Product Description: | Rolling microcrystalline product, which is based on a variety of slag as the main raw material, melting, calendering, crystallization, annealing from a high strength, high wear resistance, corrosion resistance of new high-tech materials and construction of industrial protective decorative sheet . Rolling ceramic plate main features (1) high abrasion Microcrystalline hair plate main ingredient of silica, alumina, zirconia, magnesium oxide, iron oxide, has excellent wear resistance, the abrasion can be as low as 0.03g/cm2 is three times that of ordinary cast stone (0.09g/cm2), 7-8 times that of manganese steel, cast iron 15-20. (2) corrosion-resistant The microcrystalline hair plate corrosion resistance superior to the acid-proof brick, marble, granite, ordinary cast stone. Both acid and alkali, especially the turn of the environment of the acid-base can also be used. (3) the impact resistance Microcrystalline hair plate impact resistance up to 5.5KJ/M2, ordinary cast stone three times (1.57KJ/M2) far to meet the the needs of the vast majority of material handling parts. Low coefficient of friction The friction coefficient is 0.05, more use, the smoother the surface, no expansion positions, do not hang the material. 5 thin and light Microcrystalline gross thickness from 8 to 20mm, most cases simply use the thickness of 14mm around to meet the actual needs, the actual proportion of only 2.72, only 1/3 of steel, so the relative increase in the internal volume of the position the body, reducing equipment and position the body weight. 6 can be field cut. 7 Optimization of indicators and technical parameters: Rolling ceramic plate No test item test value (1) the impact toughness 3.2KJ/m2 Of resistance to rapid cooling and rapid heating to 175 ℃ for 1 hour, placed in the indoor environment of 16 ℃ for 40 minutes, no cracks generated (3) the bending strength of 65.2MPa (4) compressive strength 601.2MPa 5 the amount of wear 0.05g/cm2 6 acid degree 98% sulfur suan 99.2% 20% sulfur suan 98.4% Acid resistance 20% sodium hydroxide 98.5% Implementation of standards: Q/HWY01-2004 reference standard: JC514.1-93 Part of the physical properties of the ceramic plate Performance Name Unit Index Thermal conductivity (20C) W / mc 1.05 Coefficient of thermal expansion (20-300C) 10-7 / ℃ 70-80 Coefficient of friction 0.05 The use of temperature ° C should not be greater than 350 Rolling ceramic plate Description: rolling ceramic plate is a variety of slag as the main raw material, melting, calendering, crystallization, annealing and the formation of a high strength and high corrosion resistance of new high-tech industrial protective material and architectural decoration materials . Its wear resistance than manganese steel 7-8 times, 15-20 times higher than cast iron, corrosion resistance is 10-25 times higher than stainless steel and rubber, can be a lot of alternative to cast stone, cast iron, polymer, MDF, acid board. granite, marble |
Admin>>>
You are the 33915 visitor
Copyright © GuangDong ICP No. 10089450, Emerging Chemical Co., Ltd. Shandong All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 33915 visitor
Copyright © GuangDong ICP No. 10089450, Emerging Chemical Co., Ltd. Shandong All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility